Can't Program

Question

2015 Q50 Non hybrid. I connected all the wires from the EVO-NIST4 T Harness to the BCM properly. The car could also start fine. I used the Flashlink to program the Remote Starter. Then when i Connect the Black Connector to the box inside the car. nothing happens. I rechecked all my connections and the car starts fine with no issues, it's just that it can't power the black box. no lights in any of the 3 indicators. When I connect it to the computer through the Flash Link there isn't any program.

 

Do I have a faulty harness?

Answer 1

please provide the 12 character service number of the module. even with no firmware in the actual module, it will still flash all 3 leds when connecting it in the vehicle to tell you there is no firmware in the evo module.