Questions & Answers

Ready mode while driving

0 votes
2018 VW Golf Manual with Push to Start

Evo-One with THAR-VW harness and TB-VW.

Everything works as it should when parked, but while driving, ready mode constantly turns off and on. The parking lights will flash at other drivers and the relay begins clicking each time the foot brake is released. The parking brake is definitely not on (the signal is from CAN).

Should I manually wire the parking/emergency brake and bypass the CAN signal?
posté Mar 9, 2021 dans la catégorie Volkswagen par Adam Wildenstein (160 points)

1 Réponse

+1 vote
Ive seen this when option 33.2 is enabled to fix it please do the following: Connect the yellow wire from the 20 pin connector to the pink wire on the main 6 pin connector of the evo-one.
répondu Mar 9, 2021 par derek g (348,060 points)
Thank you Derek.

Yellow (A1) is connected to Pink (E5) and it has not made a difference. As you suspected, 33.2 is enabled. Do you have any alternative suggestions?

Yellow (A1) connected to Pink (E5) is the solution to your issue. Did you test the yellow wire after the connection was made?

 

Other option would be to turn off option 33.2, enable 33.1 and activtae ready mode via an RF kit. 

I will test the wire and add an RF kit if required. Thank you.
...