Questions & Answers

FAQ - GM and EVO-ALL Hardware 5 Programming

+1 vote

This only concerns newer GM vehicles when the EVO-ALL does not want to program.

 

Problem: Evo-All with hardware 5 ONLY does not program. Harwdare is written on the back of the EVO-ALL on the top right corner of the sticker.

 

Solution:

Three possible solutions:

  1. Change the Evo-All for a hardware 4 model.
  2. Install a 50K pull down resistor on the Red/Blue wire of the Evo-All. (one side to ground, the other to the Red/Blue wire)
  3. Flash to firmware 4.07 and tie the Lt.Blue and Red/Blue wires of the Evo-All together.
posté Aout 20, 2014 dans la catégorie Bypass par Mukesh Patel2 (1,640 points)
re-tagguée Aout 22, 2014 par Robert T

Merci de vous connecter (ou de vous inscrire) pour pouvoir répondre aux questions.

...