Data BCM Cable for Subaru 2015 WRX STI Standard Key with EVO ALL

Question

Hello, I am looking at the wirecolor reference document for the 2015 Subaru WRX STI Standard Key using the EVO ALL and the Data BCM cable is not shown in the wire color document. Just want to confirm which cable I have to connect. Picture # 16 shows the BCM correct? Is the Data BCM cable located in that far right plug on the BCM?I know is Pin 11 and red color but just want to confirm that is that plug on the BCM. Thank you for your help.

Answer 1

The guide has  not been updated to reflect changes yet, but... You need to wire lock and unlock directly from the remtoe starter to the vehicle. To disarm the vehicle, you need to enable the pulse ignition and transponder option in the remote starter options.

 

• Lock - Light Green / Black - Pin 9 connector C
• Unlock - Blue / Black - Pin 20 connector C

 

Comments

Hello Robert, yes I did this connection as well with no problems and the lock and unlock are working fine. So that Data BCM cable connection from the guide# 3034 connection #5 is not needed then?

---

Correct. The data BCM is only for keyless entry.

---

Excellent. Thank you.