2014 Focus cannot program rf kit.

Question

I have a 2014 Focus with RF kit using evo all and a t harness.  I get no response when trying to activate remote start on last step of programming.  I was told pins in rf antenna need to be re-pinned as stated in step 8?  I can not find where this is or what the pins should be.  Is there a diagram somewhere?

Answer 1

Which RF-KIT ?

 

All step by step guides are listed here : https://fortin.ca/en/technology/rf_kits.html

Comments

It is a FTD 100

---

With the EVO-ALL and FTD100, the blue and white wires need to be swapped. Just in case, this is the step by step guide; it states to use the datalink cable supplied with the EVO-ALL and swap the pins in there (pictures included in guide) :

• https://fortin.ca/download/20141/EVO-ALL%20RF-KIT%20FirsTech%20FT-D100.pd

Don't forget to enable the option in the EVO-ALL.

 

---

Which datalink connector am I swapping the white and blues wires in?  The 4 pin connector at the EVO ALL module or the 4 pin connector at the FTD100?

---

OK, I figured out it was the end on the rf kit that needed to modified. Only other question I have is how do I make the lock/unlock feature work? I turned it on using the flasher but there appears to be mulitple ways to wire it but none appear to be working.