2007 Infiniti G35 Sedan EVO ALL with VIPER 4105V

Question

I installed the EVO ALL with T-Harness on my 2007 Infiniti G35 Sedan PTS along with a Viper 4105V remote start.  I made ALL connections and was able to program the EVO according to the Guide 12651 (I used the data/D2D cable to connect the two components).  When complete, the car would not start.  When remote start button is pressed, the ACC will come on, if I press the button again, the IGN will come on, press it one more time and the IGN will turn off.  I'm not sure if this is an issue of the components not being compatible, if there is an issue with the EVO or an issue with the Viper.  Is there a remote start or RF kit that is guaranteed to work in my car with the EVO ALL?

Answer 1

Get behind the vehicle, when you try to remote start, do the brake lights come on ?

Comments

I'll get back to you on that.  I had to pull everything out so that I could drive the car to work this week. :)

---

Disable B2 in your options.

Option G - Evo-Alarm system should also be disabled