BASIC WIRES USING THE T-HARNESS

Question

Using the T-Harness do any other wires other than the CAN HIGH and CAN LOW need to be hooked up when doing a Basic install? 2014 Ford Escape, Stand Alone.  I get to step 8 after after programing the keys and press the program button and nothing happens. I have the red 6 pin plug, white 5 pin plug and the black 4 pin plug all in.  The only wires I have hooked up are the CAN HIGH and CAN LOW.

Answer 1

I figured it out...I for some reason thought that I didn't have to hook up any wires from the 20 pin plug.  I hooked up A1 A10 A16 and A20 and it is now up and running.  I now only have to hook up my running lights and it will be done.

Answer 2

Just wondering the same thing I am preparing for install tomorrow...you tube video led me to believe it was a bit easier then it actually is because they left some connections out.  I think from looking at the schematic you must also connect the yellow black, light blue, and light blue/black to the 20 pin connector. Not too bad if that is all but mine might be alittle different I am installing on a 2011 ford f150.

Answer 3

what has to be done to hook up running lights? not sure if I need to do that also what was A16 for? I dont think I need to do that one either. thanks