Can't remote start Ford Fusion 2014/2015 using 3x Lock on Evo-ONE

Question

I cant remote start the vehicle.
When I push 3x the lock button on the vehicle remote, nothing happen.
I double checked the wires, and all 7 was soldered. I can sent you pictures of the connection that I made.
The programming was made successfully as well. When I plug the six pin cable, the LEDs alternate from blue yellow red and when I release the programming button, the blue LED stay still. Then I connect the others cables and turn the ignition to ON position (without start the engine) so the leds start to flash quickly on red then quickly on blue. That's all.
My vehicle is a Ford Fusion 2014/2015 SE 2.0 with normal start.
Best regards.

Answer 1

In the BYPASS options, enable C1 - OEM Remote Monitoring

In the REMOTE STARTER options, enable option 38 to mode 2

Comments

Hello Mathieu, your response just worked! Thank you very much.

Just got the Flash Updater and did the programming as you said and work like a charm! Very happy!

Best regards.

Answer 2

You will need to do 2 things to make this work

 

1. You need to turn ON option C1 in the bypass side

 

2. You need to change function 38 to mode 2 in the remote starter side

Comments

Mathieu ,

my answer was on my screen while I was answering a call, I didn't see you answered already.

LOL

---

Thank you both!

So I will need a Flash Updater to do so?

I bought from Lessco on eBay because here in my country we have no dealer.

But I had pay extra to him for programming the module.

I will complain to him...!

Anyways thanks again for the answers, I will buy the Flash Updater then I let you know if work or not.

Best regards.

---

Hello  Monroy, thank you for your reply, as it worked for me.

I had received my Flash Updater and did what you say.

 

Best regards.

 

Dny.